For applications that do not require dimming, the use of LinkSwitch-PH eliminates the need for electrolytic capacitors. Our single-stage PFC/constant current design allows designers to eliminate bulk capacitors—usually between traditional PFC and constant current stages. The only remaining requirement for the capacitor is to power the LED through the low point of the AC waveform (at this point, the voltage is close to zero) in the output. Ceramic capacitors, tantalum capacitors or OSCON capacitors of sufficient capacity can be used instead of electrolytic capacitors to eliminate 100Hz or 120Hz flicker. For high temperature, high reliability industrial applications that are less concerned with dimming, I strongly recommend not using electrolytic capacitors for design.
The market demand for LED lighting power varies by application. For example, the design requirements for consumer light bulbs are quite different from streetlights or industrial fluorescent replacement lamps. But in general, all customers need reliable, energy-efficient LED driver products. Other requirements include power factor correction (PFC), flicker-free thyristor dimming, high-precision constant-current drive output across different input voltages, temperatures, and bulbs, as well as consistent turn-on and turn-off performance. Power IntegraTIons (PI) devices offer these features in both LinkSwitch-PH (isolated) and LinkSwitch-PL (non-isolated) topologies, depending on the mechanical isolation method chosen and the security of the target application. rule.
The two-stage architecture is suitable for legacy drivers that must use a second constant current drive circuit to allow the PFC to drive the LEDs at constant current. These designs are outdated and no longer cost effective, so in most cases it is best to use a single stage design.
The physical design determines whether the drive is isolated or non-isolated. Security rules usually require the use of two separate isolation layers. Designers can choose between two physical barriers – a plastic diffuser and a glass shield – and a non-isolated power supply. Or, if physical isolation costs are too high, there are mechanical difficulties, or too much light is absorbed, electrical isolation issues must be addressed in the power supply. Isolated power supplies are typically larger than non-isolated power supplies of the same power level. Lighting designers must perform significant cost and design optimizations in each of the products they design.
The main challenge facing domestic manufacturers will be how to optimize the quality cost, which is one of the basic requirements of LED lights. Today, a large number of small companies have entered the LED lighting business, and the market price has been declining due to competition. The use of high-quality, high-reliability power supplies in systems where space is limited and where heat dissipation is difficult (such as LED luminaires) will no longer be free; however, before the end user has used many of the bulbs that last for about 10,000 hours, It is quite difficult to prove that its quality is high. If you rely on a drive controller company that is well-known for producing high-quality power products for harsh environments such as household appliances and electricity meters, things are much simpler.
About Silicone Power Bank Case:
Silicone Power bank case is made of silicone,its texture is soft and comfortable.silicone Powerbank Case has soft-touch finish looks and feels great simple clip-on design for easy installation.It is durable enough to protect your power bank from dust, scratching and other external impact.Silicone power bank case is your power bank good protector!
Silicone Power bank case introduction:
1.Product name:Powerbank case,Iphone Case Powerbank,Powerbank Case No Battery, Powerbank Cover ,Powerbank Case Silicone, Powerbank Shell Case
2.Place of origin:Guangdong China
3.Color:any pantone color
4.Logo:Printing,debossed,embossed
5.MOQ:500pcs.
6.Package:1 pcs/opp,customized design is available.
7.Design:Customized/stock
8.Certification:FDA,LFGB,SGS,ROHS,etc.
9.Usage:Use for Powerbank/Decoration.
10.Silicone Power bank case for reference.
Silicone Power Bank Case
Silicone Power Bank Case,Powerbank Case,Iphone Case Powerbank,Powerbank Case No Battery,Powerbank Cover,Powerbank Case Silicone,Powerbank Shell Case
OK Silicone Gift Co., Ltd. , https://www.oemsiliconegift.com