Looks cool European Cup small living room is also a big theater

In order to not waste everyone's time and energy, first report the configuration and environment, and then you can examine whether there is any reference to meaning or interest, and then decide whether to continue reading.

Projector: BenQ W1400

Speaker box: Swans RM600HT

Amplifier: Marantz SR7008

Subwoofer: Suns HRS12

Screen: 120-inch ordinary electric screen (Taobao counterfeit bar)

Wire: Open Boer L Series 1.4 8 meters, Akihabara 250-core speaker cable, Cheap 1 meter HDMI cable a pile.

Player: One HTPC, one M28, and the other one.

Download: HTPC Win10 virtual machine black group Hui, hanging 2 disk X 2T. Configuration is as follows: a bit malformed, the reasons behind the details.

CPU: E3 1231 V3 (In this plan I3, the result unexpectedly bought 1231)

Motherboard: Gigabyte B85 Phoenix Edition

Memory: Kingston 8G

Graphics card: R7 240 graphics card (because CPU has an accident, so I had to add a graphics card)

Hard Disk: 120K SSD from Netac's Msata Interface

Chassis: Qiao Sibo V6 chassis Aunt recommended NX350ATX power supply

Storage: Orico HDD 5-bay USB 3.0 interface expansion

House area: 100 square meters, made into a small three-bedroom, landmark: Changzhou

Viewing position: living room, front and rear distance 3.3 meters, left and right distance 3.5 meters

The floor plan is like this,

Behind is projection and surround:

The front is from left to right, floor box 1, subwoofer, Orico HDD box, HTPC, center, power amplifier, floor box 2, full of Dangdang just down. The table is the magic as the M28, above the curtain, behind the curtain There is a 50-inch music TV.

Remote control family portrait, there is a remote control can not find the magic.

The panorama looks like this: It's just a matter of picking up a photo, or a mess. There's something hidden under the curtains, so it's not even.

Projection

Projection selection: BenQ W1400

The projection started at 6.18 last year and has been used for a full year now. In a BenQ projection group organized inside the group purchase, Tmall State Bank with invoices, 4 pairs of glasses 8400, today the price should be very common, before and after the group bought more than 10 units. Why BenQ W1400 is chosen? In fact, my first choice is 1070 or 1070+, which is cheap and basic functions are also available. But my front and rear wall distance is 3.3 meters, remove the 10 centimeters that the curtain left for the TV, remove the projector lens from the wall distance of almost 30 centimeters, only 2.9 meters of space, 2.9 meters cast 120 inches, 1070 will only be ruled out Then, W1400 became a natural choice. BenQ W1400 basic parameters, a simple summary is that 1.8 meters can be invested in 80 inches, 2.86 meters can be cast 120 inches, DLP 6 times the color wheel, 2200 lumens, with interpolation frames, 1080P, the lens can not be about the upper and lower displacement, with 2 speakers Can speak. What is the obvious difference between the 1070 series and the investment size? There is no comparison with the environment without comment, but the volume and weight W1400: 339 x 120.2 x 284.8 mm, 3.95 KG; 1070 +: 312 x 104 x 244 mm, 2.84 kg. A circle, the weight weighed more than one thousand grams, the heavier, the more the use of materials, a few days ago to buy air conditioning when the home appliance forum to learn, self-comfort.

Many times when someone consults and buys a projector, they immediately list 3-5 projections and ask that. In fact, when choosing a projection, you should first examine how much space you have and how many inches you want to cast. From the size of the space, the size of the screen to choose the projection is to be ridiculed, Dafa is good, in my space can only cast out 80 inches, and how good it is. So first determine how many inches you want to cast, and then look at the distance between the walls. Combining the two data, you will find that the projection that is right for you is also a few paragraphs, and then it is easier to compare them, and you can save a lot of useless work. I have 120-inch space for this space. It seems that this is only the right thing to do, and I have lost a lot of entanglement.

How many inches is suitable for projection, and the feeling I use is that the space is as large as possible. I have seen 100-inch, 120-inch, 133-inch, and 150-inch other people's homes before. The bigger the shock, the bigger the required space. The larger the 2.8 or so floor height of a non-residential home, it is estimated that it is 150 to the top. My wall distance is 3.3 and the viewing distance is 2.8 meters. 120 does not feel great. Of course, we must take care of the parameters of the equipment, 500 lumens of the micro-projection will not vote more than 100 inches, and a serious shortage of brightness.

With 3D capabilities, many people care about how good this function is when it is bought, how effective it is compared to a movie theater. After one year's use, the 3D movie that was actually worn with glasses did not show up. If you look at 1/3, you feel that your eyes cannot stand. The brightness will be reduced a lot and you will switch back to 2D to continue watching. Instead, the viewing experience of 2D is better than 3D. Not to mention, the 3D effect of most 3D movies is not good. Trying so many 3D movies, the best effect is actually the Japanese two-passer. Personally feel the tasteless function, want a good 3D experience, the dual unit polarized. Sharpness, invest in more than 100 inches, 1080P is the basic right.

When wiring, the HDMI 2.0 seems to have not been out when it is bought, so it is an 8-meter 1.4-meter HDMI cable that is embedded in the pre-embedded wall. Although it is a relatively thick tube, it is not necessarily drawn. So, let's buy a little bit of the line. Someone simply buries them in two. The best estimate made in China was to open Bor's L series flat cable. It is no problem to test the cable before it is buried. Considering that the two ends may be frequently inserted and removed, two long heads are bought, and the embedded ones are directly connected and then plugged out to avoid frequent operations to remove the buried wires. Say that the transfer effect, but can not feel it.

Power Supply: After the line was laid, I conducted another test and found that each time the light was turned on or when the construction drill was started, the projector would lose the signal and recover after 2 seconds. They carefully examined their wiring and found the power of the projector. Is led from the lamp line, there is no ground wire, immediately call them to rework, pulled a line alone, the basic solution to the problem, live in and go after the occasional switch to other high-power equipment will also experience loss of signal, in the HDMI line two The end has added 2 magnetic rings, and no loss signal has been encountered since then. To sum up:

1, the line was properly tested in time, there is a chance to rework.

2. Projection, amplifier, player and other equipments are best to pull a route from the main box alone to avoid the interference caused by other equipment startup.

3, the grounding of each device socket must be done, can not be sloppy.

4. Add magnetic rings at both ends of the HDMI cable. Some people suggested filtering the power supply, and if the problem is solved satisfactorily.

Another point is to use less white around the screen, or as I do so everywhere is a strong reflection of white, the black level is reduced, the contrast is also significantly lower, the direct impact is the picture quality. The impact of reflection on picture quality is far beyond the improvement brought by the update of high-quality equipment. Remember

Amplifier articles

The power amplifier is powered by the name, so the power is the first element of the amplifier, and then it can be discharged to the other. Amplifiers can be simply divided into pre-class, post-class, merger machines. The former is responsible for decoding, the latter is responsible for power amplification, and one amplifier has both functions at the same time. General low-end is the world of the merger machine, but the power is very limited, in the case of a floor box, the existence of large-size unit, it is more urging, so a little fever discomfort in the merger machine, are the pre +Post-class, even a few post-classes. Of course, the power is low, and it will not result in no sound. The sound can still be heard. It is just an effect and it is unsatisfactory. The first set of home theaters in general is a combination of many machines, of course, does not rule out Tyrants one step in place.

Now that Dolby Sound and DTSX are very hot, they all need sky speakers and the living room is quite limited. So at the beginning, we only planned for 5.1, and the choice of amplifier would be very clear. Many of the previous generations of flagships or sub-flagship models at the time had already lowered prices to lower prices, so it was still more cost-effective to start. Marantz SR7008 should be regarded as the horse's next generation of the merger of the flagship, and after the emergence of the panoramic sound of price reduction to less than 6000, HDMI 8 into 3 can take into account the multi-device input and output to the TV and projection, 9-channel output, shutdown Through function can be in the power amplifier off the signal through the power amplifier to reach the TV or projection, the pre-level output function is retained after the expansion of the level may be, the network DLAN push, the total power of 710W. Basically meet the needs, but also retained a certain degree of expansion and upgrade capabilities later, as long as you do not upgrade the panoramic sound, plus a post-level what does not need to change the power amplifier.

Can compare the once flagship 5000 early SR7008 and entry 1500 or so Yamaha 379 interface and power output comparison, more brutal after the grade is not necessary to come up with:

Rear interface comparison: The above is Marantz SR7008, the following is YAMAHA 379

Output power comparison: The above is Marantz SR7008, the following is YAMAHA 379

Physical and weight, the heavier it is, the better it seems to apply in many industries. Above is Marantz SR7008, below is YAMAHA 379

When choosing a power amplifier, everyone must not be fooled into choosing an entry-level one. It is definitely a pit. Even a satellite box is not necessarily good, so it won't be long before it is bought. Also consider the long-term plan, whether or not to bring the output function of the post-class, whether or not to export more functions, etc., in the case of not spending much money, try to avoid throwing away the upgrade. In short, try to buy high power if the economy allows it.

The third speaker + subwoofer articles

In addition to sound, the speaker is often an important part of the furniture, and can be used to install X, in order to better complete the first few jobs, landing box is the first choice. It is necessary to take into account the economic conditions, but also to produce a good voice, but also with the furniture at least the color consistency, but also looks good enough, choose to choose to go to pick Swans RM600HT, and to ensure that the sound quality went to a specialty store audition For a moment, I made a live comparison with him at a higher price than he did. Finally, I found out that I was a verdant and I couldn't hear much difference. Nothing is better, you can buy it happily, and your wife's approval will pass through immediately.

The following price is obviously high and the transaction price is halved.

A movie does not have a subwoofer. The speaker's woofer can also be enjoyed pleasantly. After the gun is turned on, it sometimes feels like watching two different movies. The subwoofer can be said to be the finishing touch for a movie theater. effect.

The subwoofer selected the HRS12 12-inch fast airtight cannon from the sun. His friend recommended this. This is his home use. The advantage is that the price is cheap and the speed is short. The disadvantage is the lack of sense of volume. Such a high-rise building is appropriate, otherwise he will buy a large amount of feeling. The bombing of the building guns, the neighbors will have to be bothered and knocked on the door every day. Even if this is the case, most of the time when we watch movies, we still dare not open too loudly, for fear of disturbing the people.

Speakers and subwoofers are less energy-intensive, so there is nothing particularly good for everyone. The best way is to receive the ears and compare them. Both of us are actually placing orders after we have actually heard satisfaction. All of the above countries, with ticket insurance, a peace of mind, especially in front of the tumultuous true and false / line of water sun HRS12 fight, until now no results.


Player articles

Three kinds of common players, HTPC, Blu-ray disc player, box.

HTPC is a computer for playback. The advantage is that it has good compatibility. After installing the playback software, almost all the formats are consumed and the subtitles are handled better. Disadvantages are the large size, high power consumption, and relatively inexpensive prices.

Blu-ray player broadcast professional, a dedicated decoder chip, playback is often better than the other two, but the format is compatible, there are many problems with external subtitles, often through cracking to support other formats or LAN playback, mount subtitles and other functions, However, the operation after the crack is complete will be easier than the HTPC.

The last is the TV box, Android program, through the installation of the player can also support most of the formats, but most of the box may be due to the chip, drivers and other issues, the general Blu-ray movie format ISO, BDMV and other file formats, DTS Dolby and other audio formats The support is not good, the video is Karen or no sound, but watching the live TV, chasing a drama, absolutely the best choice.

My first player is the Lynx box, and the front tester is relying on it. After the entire installation, with the PT account, in the face of the 3-40G Blu-ray disk, this will not be broadcast. Due to the need for a hung PT downloader, an HTPC was assembled as a player, and the idea of ​​a black skirt hanging PT download was born.

Initially planned configuration:

CPU: I3 3220T 35W

Motherboard: Gigabyte B85 Phoenix Edition 618 special use less than 600 coupons with wireless AC Bluetooth Msata

Memory: Kingston 8G

Hard Disk: 120K SSD from Netac's Msata Interface

Chassis: Joe Sibo V6 Chassis + ATX Power Supply

Because this CPU Jingdong does not sell, take away Taobao, all other Jingdong. When the CPU arrived, an accident occurred and the goods received were actually E3 1231 V3. The first reaction to this shipment is a sly encounter. Check online, you artifact. However, this is also a tasteless, no set, silent number: You have sent a wrong I5 or I7 better than this. Refund it, can not be reconciled; re-buy an I3, this cargo is idle; use it, have to match a graphics card, power consumption to go up a large part. The key is to add the graphics card also takes up 2 hard drives, 4 discs become 2 discs, the heart of 100,000 head mud horses ran. After two days of entanglement, Jingdong under a single block of R7 240 graphics card, the assembly is complete, the peak power of the boot went straight to 100 watts. This power is still a long time to hang PT, electricity can not afford to pay. It is estimated that the CPU will have excess performance. Turn off the 3 cores and leave only one core work. The power consumption drops to about 60 watts. It can save a little bit! Tested, alone significant performance is not bad, nothing Projection play a World of Warcraft, Starcraft or do not have a flavor of Oh.

Install the system, install the virtual machine, and install the group of Hui, a related tutorial online search a lot, professional forums can search next door network, not next to Pharaoh.

In this process, some people also doubted that the computer can download PTs in the near future. Why do you have to use virtual black skirts? Those who have not used Faihui will think this way. After using it, you will find that you cannot really come back. Sooner or later, you will be defeated by a real group. The 3 most convenient features that Synology currently uses:

1, group Hui phone APP DS download, direct mobile phone operation, the task is added to the download queue, the computer automatically download.

2, mobile phone shoot baby photos, video directly through the DS File upload to the hard drive, in order to prevent the hard drive out of failure to lose, you can set up and Baidu cloud synchronization, the system will set your folder and then backup a copy to Baidu cloud. If you drag a file to the Baidu cloud synchronization directory, Synology will automatically download it back to the local. However, after Baidu's speed limit, it was a little slow, and often after 2 days, it was discovered that it was not finished.

3. After whitewashing, you can use Synology's account to realize remote management of Synology. You want to download things from anywhere, log in to your mobile phone app, and start your home.

Some of the features I use are relatively elementary and have more advanced features but I don't use them for the time being.

Several of the computers commonly used to play Blu-ray players support the most complete format is Portplayer, free, almost take all the formats. The other Kodis have strong functions and can directly support other players to support formats. Scrapers can implement movie posters and presentations. Charged Power DVD, TMT, support for the incomplete format, the letter plug-in support is not good, but the quality is indeed better than the Port, after upgrading Win10, the player has not been done, the original original support format suddenly does not support, headache Unceasingly, gradually gave up, the main player is the Port player.

Said that Blu-ray machine's best picture quality, but also could not help but temptation to start a charm as the M28, set up, you can directly play the group to download the resources, support the full format, the letter support is also good, MKV support relatively poor adjustment Without subtitles, the picture quality is better than the box and the HTPC, but the large-rate movies with more than 40G will have a Karton phenomenon. This is just a cheap player. You can consider OPPO's 103D 105D without any money. The solution is quite mature. Pioneer, Philips also has almost the same chip device. Did not understand the player before the OPPO actually did not expect to occupy the blue high-end player gimmick.

The last box, just look at the online resources, any box can basically smooth 1080P output, do not make too much quality picture, but it will not be particularly bad. Depends on the Blu-ray disc resources, only recommended sea meidi Q5, Android online things do not say that you can install third-party software is almost the same, Q5 distinguishes from other boxes the most powerful place is local playback, all formats take it all, High bit rate barrier-free, Dolby DTS fully supports, does not support the latest panoramic sound, DTSX did not pay attention. But the price is also more expensive than the general box, 599 pieces. The activity will drop a little bit. There are many opinions about the quality of the picture. There are saying that it is better than the Blu-ray player. It is better to say that compared to the HTPC and the M28, the actual test results do not show any obvious difference. The eyes are not so picky. The individual feels that the box has achieved this level of success. In fact, the key issue is that my reflection is too severe and it has greatly affected the quality of the picture. Again, upgrade the device to improve the quality of the picture, first deal with shading and reflection.

After all the equipment is installed, it is necessary to do a basic commissioning to produce the effect. Someone has already explained in detail, and I will not go into details.

If you do not want to read so many words, please jump directly to the lower part of the article as directed by the author.


The last is the source of the film. The total rate of online resources is not so high. There will always be some loss of compression details. The basic two-channel channels will not fully play our theater skills. So it is necessary to download original Blu-ray movies with multi-channel sound effects. Then you need a PT account. At the moment, PT stations are springing up, everywhere, and you need to pay attention to it. There are always free registration periods during holidays, and friends can invite or simply use them.

After that, enjoy your Blu-ray movies and of course the European Cup.

Finally put some screen shots, photography tools: Charm Blue Note, very good results were shot into the scum, but also squatting.

6

Sweeper Robot Battery

Robot Battery,Sweeper Battery,Sweeper Robot Battery,Robot Vacuum Battery

Shenzhen Sunwind Energy Tech Co.,Ltd , https://www.sunwindbatterylm.com