Computers have begun to enter more and more families. In general, families with relatively large living conditions will set up a special â€œcomputer roomâ€ once they move the computer back home. When designing and arranging computer rooms, you may wish to start from the following four aspects:
1. Ventilation is better. The computer needs a good ventilation environment. Therefore, the doors and windows of the computer room should keep the air flowing smoothly, and the standard of the wind speed can be controlled at about 1 meter per second, which is beneficial to the heat dissipation of the machine. The computer cannot be installed in an airtight room; window curtains are needed on the windows of the computer room to ensure ventilation and to prevent the floating of outdoor dust.
2. The temperature should be appropriate. Computer room temperature is best controlled between 0 Â°C ~ 30 Â°C, it is conducive to the normal work of the computer. There are three bogey in the position of the computer: a bogey in the direct sunlight window; bogey placed under the cooling vents in the air conditioner; three bogey placed near the heating radiator or heater.
3. Humidity should be appropriate. The best relative humidity in the computer room is about 40%-70%. If the humidity is too high, the contact performance of the components may deteriorate or rust may occur. When the humidity is too small, it is not conducive to the release of stored electricity after a random dynamic shutdown within the machine, and static electricity is also easily generated.
4. Soft colors. The color of the computer room should not be too dazzling, nor should it be too dark, but should be decorated in pastel shades of light, such as light green wall skirts, scarlet floors, and pale yellow curtains. Since green can not only regulate eye fatigue, but also increase the effect of indoor natural atmosphere, it is quite good to grow two pots of flowers such as evergreen, clivia, asparagus, and spider plant in the computer room.
Glass tube fuses are made by glass shell, some metal wires and two brass caps. Fuse is small safety part in an electrical device or piece of machinery that causes it to stop working if the electric current is too high, and so prevents fires or other dangers. Fuse in the abnormal current increases to a certain height and heat, its own fuse to cut off the current, to protect the safe operation of the circuit fuse protection power equipment with current overheating damage, avoid electronic equipment serious damage caused by internal fault. When a circuit breaks down or is abnormal, the current increases with the current and the increased current may damage some important components in the circuit, and it may also burn the circuit and even cause a fire. If correctly placed in the circuit fuse, the fuse will be abnormal current increases to a certain height and heat, its own fuse to cut off the current, so as to protect the safe operation of the circuit.
Auto Glass Tube Fuses
Auto Glass Tube Fuses,Max Fuse,High Quality Blade Fuse,Fuse Block
Heshan Jianhao Lighting Industrial Co., Ltd. , https://www.sunclubtw.com