We often hear that the new machine horn must be run first to be nice, relatively smooth, and even some people deliberately want to buy exhibits or two mobile phones. I think it is necessary to save the time and effort of the Run machine, and immediately enjoy the equipment. Some tone levels. However, with the different characteristics of the structure, circuit, and parts of the equipment, the time taken by the Run machine is different, and it is more likely that the time is different because of the different methods of the Run machine.
What exactly is the Run machine? We explain the following three parts:
The horn is mainly the rubber edge of the Run paper cone and the basin edge, the parts of the crossover, and the copper wire part of the coil. Usually, the new horn cone and the rubber edge will be tighter, which makes the sounding more tense, so it sounds not wide enough, the bass is not heavy and unnatural, the transient response is also poor, and the capacitor in the splitter will not be charged for a long time. The effect is poor, not to say anything, even the copper wire will be more stable for a while because the free electronic activity in copper is faster.
CDs, decks, turntables, etc. are more flexible and smooth. I think everyone knows that these institutions are all a combination of metal parts. Like a steam locomotive, if you don't run for a while, it won't be smooth.
In electronic circuits, most of them are semiconductors, capacitors and resistors. Among them, semiconductors and resistors, Run time is relatively short, capacitors may be relatively long, capacitors are like batteries, and if the pole piece is polarized, the recovery time is long, and the electrolyte is required. It will take longer to return to normal.
How to run the audio equipment well?
When you run the horn, you can wrap it with a strong sound absorption such as a quilt. You can also align the two-channel horns, and reverse the connection of one of the speaker cables. The volume. At the same time, it is necessary to use a larger power amplifier to avoid sharpening the peak and damage the speaker. The volume should be wide enough but the speaker will not be able to withstand it. If you just whisper to listen all the year round, it's not easy to run the horn very well.
The mechanical action part, anyway, opens it so that it keeps turning right. The CD is more convenient and easy. Pressing the Repeat button is fine, and it is roughly smooth after two or three days. The parts of the electronic circuit may have to be operated for a long time. The post-stage expansion machine can also connect the electric power of the high-power aluminum casing to the impedance load of the old material store to connect it to the water, and soak it into the water to dissipate heat; Don't open too much volume, or cause a short circuit, lest the machine not run well, first burn it off. We often hear that the new machine horn must be run first to be nice, relatively smooth, and even some people deliberately want to buy exhibits or two mobile phones. I think it is necessary to save the time and effort of the Run machine, and immediately enjoy the equipment. Some tone levels. However, with the different characteristics of the structure, circuit, and parts of the equipment, the time taken by the Run machine is different, and it is more likely that the time is different because of the different methods of the Run machine.
What exactly is the Run machine? We explain the following three parts:
The horn is mainly the rubber edge of the Run paper cone and the basin edge, the parts of the crossover, and the copper wire part of the coil. Usually, the new horn cone and the rubber edge will be tighter, which makes the sounding more tense, so it sounds not wide enough, the bass is not heavy and unnatural, the transient response is also poor, and the capacitor in the splitter will not be charged for a long time. The effect is poor, not to say anything, even the copper wire will be more stable for a while because the free electronic activity in copper is faster.
CDs, decks, turntables, etc. are more flexible and smooth. I think everyone knows that these institutions are all a combination of metal parts. Like a steam locomotive, if you don't run for a while, it won't be smooth.
In electronic circuits, most of them are semiconductors, capacitors and resistors. Among them, semiconductors and resistors, Run time is relatively short, capacitors may be relatively long, capacitors are like batteries, and if the pole piece is polarized, the recovery time is long, and the electrolyte is required. It will take longer to return to normal.
How to run the audio equipment well?
When you run the horn, you can wrap it with a strong sound absorption such as a quilt. You can also align the two-channel horns, and reverse the connection of one of the speaker cables. The volume. At the same time, it is necessary to use a larger power amplifier to avoid sharpening the peak and damage the speaker. The volume should be wide enough but the speaker will not be able to withstand it. If you just whisper to listen all the year round, it's not easy to run the horn very well.
The mechanical action part, anyway, opens it so that it keeps turning right. The CD is more convenient and easy. Pressing the Repeat button is fine, and it is roughly smooth after two or three days. The parts of the electronic circuit may have to be operated for a long time. The post-stage expansion machine can also connect the electric power of the high-power aluminum casing to the impedance load of the old material store to connect it to the water, and soak it into the water to dissipate heat; Don't open too much volume, or cause a short circuit, lest the machine not run well, first burn it off. We often hear that the new machine horn must be run first to be nice, relatively smooth, and even some people deliberately want to buy exhibits or two mobile phones. I think it is necessary to save the time and effort of the Run machine, and immediately enjoy the equipment. Some tone levels. However, with the different characteristics of the structure, circuit, and parts of the equipment, the time taken by the Run machine is different, and it is more likely that the time is different because of the different methods of the Run machine.
What exactly is the Run machine? We explain the following three parts:
The horn is mainly the rubber edge of the Run paper cone and the basin edge, the parts of the crossover, and the copper wire part of the coil. Usually, the new horn cone and the rubber edge will be tighter, which makes the sounding more tense, so it sounds not wide enough, the bass is not heavy and unnatural, the transient response is also poor, and the capacitor in the splitter will not be charged for a long time. The effect is poor, not to say anything, even the copper wire will be more stable for a while because the free electronic activity in copper is faster.
CDs, decks, turntables, etc. are more flexible and smooth. I think everyone knows that these institutions are all a combination of metal parts. Like a steam locomotive, if you don't run for a while, it won't be smooth.
In electronic circuits, most of them are semiconductors, capacitors and resistors. Among them, semiconductors and resistors, Run time is relatively short, capacitors may be relatively long, capacitors are like batteries, and if the pole piece is polarized, the recovery time is long, and the electrolyte is required. It will take longer to return to normal.
How to run the audio equipment well?
When you run the horn, you can wrap it with a strong sound absorption such as a quilt. You can also align the two-channel horns, and reverse the connection of one of the speaker cables. The volume. At the same time, it is necessary to use a larger power amplifier to avoid sharpening the peak and damage the speaker. The volume should be wide enough but the speaker will not be able to withstand it. If you just whisper to listen all the year round, it's not easy to run the horn very well.
The mechanical action part, anyway, opens it so that it keeps turning right. The CD is more convenient and easy. Pressing the Repeat button is fine, and it is roughly smooth after two or three days. The parts of the electronic circuit may have to be operated for a long time. The post-stage expansion machine can also connect the electric power of the high-power aluminum casing to the impedance load of the old material store to connect it to the water, and soak it into the water to dissipate heat; Don't open too much volume, or cause a short circuit, lest the machine not run well, first burn it off.
What exactly is the Run machine? We explain the following three parts:
The horn is mainly the rubber edge of the Run paper cone and the basin edge, the parts of the crossover, and the copper wire part of the coil. Usually, the new horn cone and the rubber edge will be tighter, which makes the sounding more tense, so it sounds not wide enough, the bass is not heavy and unnatural, the transient response is also poor, and the capacitor in the splitter will not be charged for a long time. The effect is poor, not to say anything, even the copper wire will be more stable for a while because the free electronic activity in copper is faster.
CDs, decks, turntables, etc. are more flexible and smooth. I think everyone knows that these institutions are all a combination of metal parts. Like a steam locomotive, if you don't run for a while, it won't be smooth.
In electronic circuits, most of them are semiconductors, capacitors and resistors. Among them, semiconductors and resistors, Run time is relatively short, capacitors may be relatively long, capacitors are like batteries, and if the pole piece is polarized, the recovery time is long, and the electrolyte is required. It will take longer to return to normal.
How to run the audio equipment well?
When you run the horn, you can wrap it with a strong sound absorption such as a quilt. You can also align the two-channel horns, and reverse the connection of one of the speaker cables. The volume. At the same time, it is necessary to use a larger power amplifier to avoid sharpening the peak and damage the speaker. The volume should be wide enough but the speaker will not be able to withstand it. If you just whisper to listen all the year round, it's not easy to run the horn very well.
The mechanical action part, anyway, opens it so that it keeps turning right. The CD is more convenient and easy. Pressing the Repeat button is fine, and it is roughly smooth after two or three days. The parts of the electronic circuit may have to be operated for a long time. The post-stage expansion machine can also connect the electric power of the high-power aluminum casing to the impedance load of the old material store to connect it to the water, and soak it into the water to dissipate heat; Don't open too much volume, or cause a short circuit, lest the machine not run well, first burn it off. We often hear that the new machine horn must be run first to be nice, relatively smooth, and even some people deliberately want to buy exhibits or two mobile phones. I think it is necessary to save the time and effort of the Run machine, and immediately enjoy the equipment. Some tone levels. However, with the different characteristics of the structure, circuit, and parts of the equipment, the time taken by the Run machine is different, and it is more likely that the time is different because of the different methods of the Run machine.
What exactly is the Run machine? We explain the following three parts:
The horn is mainly the rubber edge of the Run paper cone and the basin edge, the parts of the crossover, and the copper wire part of the coil. Usually, the new horn cone and the rubber edge will be tighter, which makes the sounding more tense, so it sounds not wide enough, the bass is not heavy and unnatural, the transient response is also poor, and the capacitor in the splitter will not be charged for a long time. The effect is poor, not to say anything, even the copper wire will be more stable for a while because the free electronic activity in copper is faster.
CDs, decks, turntables, etc. are more flexible and smooth. I think everyone knows that these institutions are all a combination of metal parts. Like a steam locomotive, if you don't run for a while, it won't be smooth.
In electronic circuits, most of them are semiconductors, capacitors and resistors. Among them, semiconductors and resistors, Run time is relatively short, capacitors may be relatively long, capacitors are like batteries, and if the pole piece is polarized, the recovery time is long, and the electrolyte is required. It will take longer to return to normal.
How to run the audio equipment well?
When you run the horn, you can wrap it with a strong sound absorption such as a quilt. You can also align the two-channel horns, and reverse the connection of one of the speaker cables. The volume. At the same time, it is necessary to use a larger power amplifier to avoid sharpening the peak and damage the speaker. The volume should be wide enough but the speaker will not be able to withstand it. If you just whisper to listen all the year round, it's not easy to run the horn very well.
The mechanical action part, anyway, opens it so that it keeps turning right. The CD is more convenient and easy. Pressing the Repeat button is fine, and it is roughly smooth after two or three days. The parts of the electronic circuit may have to be operated for a long time. The post-stage expansion machine can also connect the electric power of the high-power aluminum casing to the impedance load of the old material store to connect it to the water, and soak it into the water to dissipate heat; Don't open too much volume, or cause a short circuit, lest the machine not run well, first burn it off. We often hear that the new machine horn must be run first to be nice, relatively smooth, and even some people deliberately want to buy exhibits or two mobile phones. I think it is necessary to save the time and effort of the Run machine, and immediately enjoy the equipment. Some tone levels. However, with the different characteristics of the structure, circuit, and parts of the equipment, the time taken by the Run machine is different, and it is more likely that the time is different because of the different methods of the Run machine.
What exactly is the Run machine? We explain the following three parts:
The horn is mainly the rubber edge of the Run paper cone and the basin edge, the parts of the crossover, and the copper wire part of the coil. Usually, the new horn cone and the rubber edge will be tighter, which makes the sounding more tense, so it sounds not wide enough, the bass is not heavy and unnatural, the transient response is also poor, and the capacitor in the splitter will not be charged for a long time. The effect is poor, not to say anything, even the copper wire will be more stable for a while because the free electronic activity in copper is faster.
CDs, decks, turntables, etc. are more flexible and smooth. I think everyone knows that these institutions are all a combination of metal parts. Like a steam locomotive, if you don't run for a while, it won't be smooth.
In electronic circuits, most of them are semiconductors, capacitors and resistors. Among them, semiconductors and resistors, Run time is relatively short, capacitors may be relatively long, capacitors are like batteries, and if the pole piece is polarized, the recovery time is long, and the electrolyte is required. It will take longer to return to normal.
How to run the audio equipment well?
When you run the horn, you can wrap it with a strong sound absorption such as a quilt. You can also align the two-channel horns, and reverse the connection of one of the speaker cables. The volume. At the same time, it is necessary to use a larger power amplifier to avoid sharpening the peak and damage the speaker. The volume should be wide enough but the speaker will not be able to withstand it. If you just whisper to listen all the year round, it's not easy to run the horn very well.
The mechanical action part, anyway, opens it so that it keeps turning right. The CD is more convenient and easy. Pressing the Repeat button is fine, and it is roughly smooth after two or three days. The parts of the electronic circuit may have to be operated for a long time. The post-stage expansion machine can also connect the electric power of the high-power aluminum casing to the impedance load of the old material store to connect it to the water, and soak it into the water to dissipate heat; Don't open too much volume, or cause a short circuit, lest the machine not run well, first burn it off.
XLPE Insulated PVC sheath Alloy Cable is kind of cable, in which the rare earth high compressed aluminium alloy is used as conductor, and PVC is used as Jacket wound around. The insulation adopts XLPE material, featuring with fire & moisture resistance. The whole structure is designed and manufactured elaborately based on advanced international technology and equipment. It has completely independent intellectual property rights and removed the defects of aluminum cable systematically. It applies to both dry and moist places at the temperature of 90ºC and under. This cable presents excellent mechanical performance.
Standard: GA306 Jacket: PVC
Conductor: aluminum alloy Cores: single core or multicores
Insulation: XLPE Feature: flame retarded
Rated voltage: 0.6/1KV, 8.7/10KV, 8.7/15KV, 26/35KV
Advantages:
- Conductor fatigue resistance
- Light weight
- Easy installation
- Long life span
- Flame retarded
- Decent mechanical strength
- Chemical & acid resistance
- Creep resistance
- Impact resistance
- Easy to bend
- Fire resistant
- Zero halogen & low smoke
- Corrosion & abrasion resistant
- ...
Application:
- For civil use
- For commercial use
- For industrial use
- Schools
- Large venus
- And many more...
Welcome to visit our factory to learn more about us. If you have any questions, please feel free to contact us.
XLPE Insulated PVC Sheathed Alloy Cable
XLPE Insulated PVC Sheathed Alloy Cable,XLPE Insulated Al Alloy Cables,Aluminum Alloy XLPE Cables,Al Alloy Armoured XLPE Cables
Fujian Lien Technology Co.,Ltd , http://www.liencable.com