1. Check before washing: Take out the coins and miscellaneous items in the pocket before washing. The clothes with metal buttons should be buckled with metal buttons and flip the clothes so that the metal buttons are not exposed to prevent metal during the washing process. Hard objects damage the laundry tub and pulsator.
2, the implementation of the standard: a laundry amount can not exceed the prescribed amount of the washing machine, the amount of water shall not be lower than the mark off the assembly, so as to avoid overheating the motor due to overload and cause insulation aging affect the life.
3, to avoid high temperatures: the temperature of washing water should not be too high, generally 40 °C is appropriate, the maximum should not exceed 60 °C (except drum high-temperature sterilization washing machine), so as not to burn the laundry barrel or cause plastic aging, deformation.
4. Wash and clean: After each laundry, drain the clean water and wash the washing machine barrel with clean water. Dry the water droplets and water inside and outside the washing machine with a dry cloth. Turn the knobs and keys on the operation board back into place. Drain switch indication in the closed position, then placed in a dry and ventilated place.
5. Avoid chemicals: Do not use strong alkali, gasoline, olefins, and hard bristle brushes when washing the washing machine, and do not use hard appliances when cleaning the filters and drains.
6, security inspection: often pay attention to check the power lead, found that there is damage or aging, should be promptly dealt with.
7, regular maintenance: Some washing machine pulsator spindle cover with oil hole, every two or three months available oiler oil hole to add a few drops of oil.
MOSO provide Dim-to-off Led Driver for energy-saving and circuit safety, supporting 0-10V, PWM, timer step dimming or DALI control, with low stand-by power. It is IP67, build-in surge protection, Class II design, power range 75W~320W. Dimming driver can adjust the output by programming software or controller which is isolated with diming signal.
This Dimming driver ensures cool operation and long life with extruded-metal housing and fully glue-potted. It is certified by CCC, CE, TUV, ENEC and CB standards, widely used in street lighting, flood lighting, industrial lighting.
MOSO has set several distributors in Europe, United States, Latin America, Asia and Australia. All MOSO Dim-to-off Led Driver provide 5 years global warranty. In case of any failure, customers can get replacement either from MOSO directly or any one of MOSO distributors.
MOSO always dedicates to providing professional outdoor lighting solutions. Please feel free to contact our sales team if you need any support!
Dim-to-off Led Driver
Dim-to-off Led Driver,Dim-to-off LED Dimmable Driver,Dimmable Dim-to-off LED Driver,Dim-to-Off Timer Dimmable LED Driver
Moso Electronics , https://www.mosoleddriver.com