The latest model "Spot Cure SPL-2" for the "Spot Cure Series" of the ultraviolet (UV) spot irradiation device will be available for the Oxtail Motor. In order to overcome the shortcomings of the original LED model - short life, illuminance attenuation and other issues, the oxtail motor uses the built-in LED of the body. The launch of the new product will facilitate the replacement of the light source of the point source UV illumination device from the lamp to the LED.
Various processes such as electronics, automobiles, and medical devices use a process in which a small area of ​​about 1 to 10 mm in diameter is irradiated with UV light, and the resin is cured, bonded, packaged, and peeled off. The light source of the point source UV irradiation device used in the process has a tendency to be replaced by an original UV lamp into an LED. However, when the light source is an LED, there is a problem that the life of the LED is short, the illuminance is attenuated, the yield is lowered, and the shape of the heat dissipating mechanism provided at the tip end portion is particularly restricted to the construction of the production line.
The reason for the above problem is that the heat generated by the LED embedded in the tip end portion of the original LED point source UV irradiation device is hard to be dissipated. In this regard, the oxtail motor adopts a method of embedding the LED into the body of the device, and directing the light emitted by the LED with the optical fiber to illuminate the tip end portion. At this time, in order to efficiently use UV light, the light emitted from the LED is efficiently introduced into the optical fiber by an autonomous optical design, and the high-efficiency liquid optical fiber is used to efficiently guide the light to the tip of the optical fiber. As a result, the life of the LED is extended by a factor of two, and the illuminance decay rate is improved from about 15% to 3%. It is said that the end portion of the illumination can be completely eliminated from the heat sink.
Semi-harvester for Agriculture:
The semi-feeding harvester can complete the harvesting, delamination, separation of stems, removal of sundries and other processes at one time, and the Rice Harvester machine for obtaining grain directly from the field is mainly suitable for rice harvesting, wheat harvesting, and this reaper machine can adapt to deep mud feet. Under the serious harvest conditions, the grain cleanliness after harvest is very high, and at the same time, the stem integrity after harvest can be guaranteed, so that farmers can complete harvesting and granulation with a single operation, thus saving manpower and material resources and greatly reducing the burden of farmers.
Semi-harvester for Agriculture Technical Parameters:
1. Size: 3650*1800*1820 (mm)
2. Weight: 1480KG
3. Engine Fuel: Diesel
4. Harvest numbers line: 3
5. Harvesting width: 1200 (mm)
6. Cutting height range: 50-150 (mm)
7. Threshing depth control system: Manually
8. Adaptation crop height: 650-1200 (mm)
If you have any questions, please contact us directly. Crawler tractor for agriculture are produced by Hunan Nongfu with high quality and good appearance.
welcome you can visit our factory for inquiry, please send mail directly to us.
Semi-harvester for Agriculture
China Harvester Machine, Rice Harvester, reaper machine, Agriculture equipment
Hunan NongFu Machinery&Electronic.Co., Ltd. , https://www.nfagmachine.com