Tender No.: YXS20090501801
Tendering Agent: Jiangsu Hongcheng Engineering Cost Consulting Co., Ltd. Owner: Yixing Xinjie Sub-district Office Registration Deadline: 2009-05-25
Region: Jiangsu Industry: Water Conservancy Bridge Construction
1. Bidding conditions The Civic Square project of Xinxing Sub-district Office of Yixing City has been approved by the Economic Development Bureau of Yixing Environmental Science and Technology Industrial Park of China. The construction funds come from self-raising and have been implemented. Jiangsu Hongcheng Engineering Cost Consulting Co., Ltd. was entrusted by the tenderer to be responsible for the tendering of the project. The construction of the project is now open for public bidding.
2. Project overview and bidding scope
2.1 Project scale: covers an area of ​​10,890 square meters
2.2 Structure Type: /
2.3 Bidding scope: in the scope of drawing design: square paving, greening, drainage, lighting
2.4 Segmentation: a section
2.5 Quality requirements: qualified
2.6 Construction period requirements: June 20, 2009 to August 30, 2009
2.7 Project Location: Xinjie Street, Yixing City
2.8 estimated contract price: about 2.5 million
3. Bidder qualification requirements
3.1 Type and level of qualifications of bid applicants: General contracting of municipal public works and above
3.2 Project Manager or Registered Architect Qualification Category and Level: Level 3 Project Manager or Level 2 and above Municipal Professional Registered Architect
3.3 This tender does not accept joint bidding.
3.4 The name of the unit of the bid applicant must be the same as the name of the unit on the enterprise qualification certificate.
3.5 This project adopts the pre-qualification method to select qualified bidders to participate in the bidding. Each applicant can apply for qualification examination of one of the above-mentioned bidding sections.
4. Registration and method of obtaining prequalification documents
4.1 Registration must provide information: 1 Introduction letter 2 Applicant identification certificate 3 Proof that the applicant is the original of the registered unit's certificate (the endowment insurance certificate or medical insurance certificate or the provident fund certificate within the first three months of registration) and Copy.
4.2 Pre-qualification documents are available for sale from May 19, 2009 to May 25, 2009, from 8:30 am to 11:00 am, and from 13:30 pm to 16:30 pm.
4.3 Pre-qualification documents for sale: Yixing City Bidding Center (No. 115, Taodu Road) Resident Office: Table 2.
4.4 Pre-qualification documents are priced at RMB 200 each, and the tenders are not refundable after they are sold.
5. Submission of prequalification documents
5.1 Deadline for submitting prequalification documents: At 16:30 on May 27, 2009, the venue is the Yixing City Bidding Center (No. 115 Taodu Road) Resident Office: Table 2.
5.2 At the same time, the original verification will be submitted at the same time: 1 Enterprise Business License 2 Enterprise Qualification Certificate 3 Wuxi City Construction Management Office issued or filed the “Jiangsu Construction Enterprise Credit Management Manualâ€, non-local enterprises first register with Yixing Municipal Administration Office Recording, after the successful bid, 4 "Jiangsu Province Construction Engineering Contracting Price Valuation Manual", the provincial enterprises do not require, but should be handled after the successful bid for 5 project manager certificate or construction engineer registration certificate 6 "Yixing City Construction Field Migrant Wage Security Management Manual Or a letter of commitment for the payment of wages for migrant workers through the municipal government of Yixing City. A copy of the above information will be bound in two copies in the above order using A4 paper, and submitted with the prequalification documents.
5.3 Prequalification documents that are overdue or not delivered to the designated location will be rejected.
6. Qualification review method
6.1 The qualification examination of bid applicants shall be carried out in accordance with the provisions of Su Jianzhao (2006) No. 372 and relevant regulatory documents. Bidder applicants shall submit a full set of qualification examination materials in accordance with the requirements of this announcement and prequalification documents. Any shortcomings may result in their application. be rejected.
6.2 Determination of potential bidders: All eligible units for pre-qualification will participate in the bidding.
7, other
7.1 Applicants who have bad behaviors who are suspended from bidding during the public notice period may not participate in the bidding of this project.
7.2 The project manager or the construction engineer who has the construction in progress or the winning project shall not participate in the bidding of the project.
7.3 The project manager or construction engineer who has changed after the successful bidding or construction period shall not participate in the bidding of the project for less than six months from the date of replacement of the record. If the project is replaced without any record, it shall be handled according to the construction in progress.
7.4 The builder who has not obtained the registration certificate must provide relevant certificates. For details, please refer to Su Jian Guan Enterprise [2008] No. 19.
7.5 If the registration project manager or construction engineer has to participate in the bidding for other projects at the same time, it must be stated in the pre-qualification documents and the bid documents. If there is any concealment, it will be handled according to relevant regulations.
7.6 After the application for prequalification is submitted, the registration project manager or construction engineer shall not be replaced in principle. If it is necessary to replace it due to special circumstances, it must be submitted to the regulatory authority for record before the bidder's written consent is obtained. The qualifications and conditions shall not be lower than the qualifications and conditions. The standard of the original qualified personnel. If it has been won in other engineering projects, it shall not be passed through the project manager or the construction engineer for approval by the project under construction.
7.7 Bidders should carefully consider the selection of a project manager or a construction engineer to participate in the bidding competition of multiple engineering projects at the same time. If the bidding project manager or the construction engineer wins the bid in multiple engineering projects, it can only be issued according to the bidding notice of different engineering projects. In time, he served as the project manager or builder of the company's first successful bidding project. The tenderer who later determines that the enterprise is the winning bidder's project will cancel the bidding qualification and may confiscate the bidding guarantee. If the bidder conceals the winning bidding project and obtains the winning bid, the bidder shall be defrauded to obtain the winning bid.
7.8 If the foreign enterprise undertakes the project in Xi, the enterprise shall first handle the credit management manual of the construction enterprise and issue a letter of commitment from the bidder construction engineer or project manager to undertake the project.
7.9 According to the document of Yizheng Fa [2008] No. 147, the bid bond must be paid before the deadline for receiving the bidding documents, and will be collected by the Yixing City Bidding Center. The bidder shall hold the certificate of the deposit paid by the bidding center of the city. The bidding documents can only be obtained. The time, place, method and amount of the bid bond payment shall be indicated in the qualification approval notice.
7.10 If the original information requested by the tenderer is not available during the annual inspection or for other reasons, the bidder shall provide a valid written certificate issued by the original issuing department or the annual inspection department, indicating the validity period. If the content of the certificate is ambiguous, ambiguous or used in other places due to the original information, the tenderee will not accept it.
Tenderer: Yixing Xinjie Sub-district Office Tenderee Address: No. 434, Xinjietangqian Village Contact: He Yaodong Telephone Tendering Agency: Jiangsu Hongcheng Engineering Cost Consulting Co., Ltd. Address: 115 Taodu Road, Yixing City Post Code: 214206
Contact: Xu Dong Telephone Fax Note: Foreign companies handle the registration of credit manuals (two copies) and pay the wage guarantee for migrant workers (four copies) to the initial review unit of the Municipal Bureau of Construction Bureau, No. 115 Taodu Road, Yixing City, contact number ). The relevant form is downloaded from the download file of the website of Yixing Construction and Installation Engineering Management Office. Download the website: http://, required materials: the enterprise with the official seal A copy of the qualification certificate and business license shall be completed and sealed as required and submitted to the municipal office for record. The foreign-invested enterprises handle the pricing manual to the Information Bureau of the Construction Bureau's quota station, and contact telephone number.
Dell have been one of the few Western companies to make significant inroads into the huge laptop and netbook market. Started in Texas by Michael Dell, the company has become a power-house of the technology sector.
Dell laptop charger include Dell Inspiron charger series, Dell Latitude charger series, Dell Precision charger series,Dell XPS charger series, Dell Studio charger series, and Dell Vostro charger series. The common Dell Laptop Charger specification has 19.5V 3.34A 65W, 19.5V 4.62A 90W, 20V 4.5A 90W etc, and the dc tip has common 5.5*2.5mm and 7.4*5.0mm with pin inside, 4.0*1.7mm bullet etc. Also Yidashun has developed the 30W 45W 65W and 90W type c Adapter for Dell.
If you want to look for a high quality replacement laptop charger for Dell laptop, Yidashun is a right choice. Yidashun can offer all models of laptop charger adapter for Dell, and our laptop adapter is with smart IC to protect your laptop with over current protection, over load protection, short circuit protection and over heat protection.
All our Dell Laptop Charger is Brand New Replacement Product, works as Genuine parts, 100% OEM Compatible!
Dell Laptop Charger,Dell Charger,Dell Inspiron Charger,Dell Computer Charger
Shenzhen Yidashun Technology Co., Ltd. , http://www.ydsadapter.com