The remote control is an essential item for watching TV, but what if the remote control is broken? At this time, many people will think of a universal remote controller. So what is the principle of universal remote control, and how is it set up?
Universal remote control principle:
The universal remote controller expands the internal memory of the chip, and collects hundreds of thousands of codes of various types of the same or different types of remote controllers in a single transmission circuit. Each code format is given a code. When it is used, the corresponding code is called out according to the code, and each function button functions. This tone coding process is called setting.
Universal remote control setting method:
Method 1. Fast digital input method Step 1: From the "Code Table", find the three-digit code that represents the TV you want to remote control.
Step 2: Hold down the "Set" button first, then press the "Power" button, and then release the two buttons, and the work indicator lights up.
Step 3: Enter the three-digit code you found, such as 083, enter a digit, and the indicator light flashes. After the three digits are input, the work indicator light goes out. After the setting is completed, you can use the remote controller to control the remote control. Your television.
Note: If there is more than one set of codes to be detected, first select the first set of codes. If the TV brand is not in this code list, try the first or third method. If there is continuous flashing two or more times, it indicates that the entered code is wrong and you need to re-enter the three-digit code.
Method two, automatic digital search The first step: manually turn on the power switch of the TV you want to remote control, so that the TV is in a program state.
Step 2: Turn the remote control directly to the TV, press and hold the "SET" button first, then press the "POWER" button, then release the two buttons, and the work indicator lights.
Step 3: Press the volume "" (or "-") button on the remote control and pay attention to whether the volume on the TV is increasing (or decreasing). Repeat this operation until the volume on the TV is increasing. (or decrease), stop the operation, and then click the "Settings" button, then the work indicator light goes out and the setting is completed.
Note: The volume + key is forward search, volume - key is to search backward, search can be switched to each other, such as using the volume + in the search, the volume symbol does not stop in time, available volume - timely recovery.
Method three, one-click quick search Step 1: Turn on the TV.
Step 2: The remote controller is aimed at the TV. Press and hold the setting button (a few seconds) until the indicator lights up and is released.
The third step: press the power button, the indicator light continues to flash, enter the automated search, when the TV appears silent symbol, immediately press the set button twice, the light is off, the search code is completed.
Note: Check if each key function is normal. If it is abnormal, reset it until you find the correct code.
Universal remote control code:
Changhong
000.008.009.091.092.093.010.011.014.016.026.028.033.051.088.100.157.158.159.
160.161.180.181.185.186.191.192.210.211.212.229.230.231.232
Konka
011.017.029.032.034.054.067.069.071.075.076.077.078.079.080.081107113117.173.
174.175.176.189.201.202.203.217.218.220.226.267.236
Skyworth
011.025.033.045.046.060.070.017.072.073.074.079.083.010.107.108.109.162.
163.164.165.166.167
TCL
051.053.068.071.073.082.083.084.085.110.111.170.171.172.178.179.
187.188.197.198.199.200.233
Haier
103.112.118.119.150.151.152.153.154.155.156.182.183.184.193.194.213.228
Hisense
000.006.007.008.010.014.015.025.045.046.103.105.107.115.116.128.129.130.131.
138.139.150.151.152.153.154.155.156.182.183.184.193.194.213.228
Universal remote control principle:
The universal remote controller expands the internal memory of the chip, and collects hundreds of thousands of codes of various types of the same or different types of remote controllers in a single transmission circuit. Each code format is given a code. When it is used, the corresponding code is called out according to the code, and each function button functions. This tone coding process is called setting.
Universal remote control setting method:
Method 1. Fast digital input method Step 1: From the "Code Table", find the three-digit code that represents the TV you want to remote control.
Step 2: Hold down the "Set" button first, then press the "Power" button, and then release the two buttons, and the work indicator lights up.
Step 3: Enter the three-digit code you found, such as 083, enter a digit, and the indicator light flashes. After the three digits are input, the work indicator light goes out. After the setting is completed, you can use the remote controller to control the remote control. Your television.
Note: If there is more than one set of codes to be detected, first select the first set of codes. If the TV brand is not in this code list, try the first or third method. If there is continuous flashing two or more times, it indicates that the entered code is wrong and you need to re-enter the three-digit code.
Method two, automatic digital search The first step: manually turn on the power switch of the TV you want to remote control, so that the TV is in a program state.
Step 2: Turn the remote control directly to the TV, press and hold the "SET" button first, then press the "POWER" button, then release the two buttons, and the work indicator lights.
Step 3: Press the volume "" (or "-") button on the remote control and pay attention to whether the volume on the TV is increasing (or decreasing). Repeat this operation until the volume on the TV is increasing. (or decrease), stop the operation, and then click the "Settings" button, then the work indicator light goes out and the setting is completed.
Note: The volume + key is forward search, volume - key is to search backward, search can be switched to each other, such as using the volume + in the search, the volume symbol does not stop in time, available volume - timely recovery.
Method three, one-click quick search Step 1: Turn on the TV.
Step 2: The remote controller is aimed at the TV. Press and hold the setting button (a few seconds) until the indicator lights up and is released.
The third step: press the power button, the indicator light continues to flash, enter the automated search, when the TV appears silent symbol, immediately press the set button twice, the light is off, the search code is completed.
Note: Check if each key function is normal. If it is abnormal, reset it until you find the correct code.
Universal remote control code:
Changhong
000.008.009.091.092.093.010.011.014.016.026.028.033.051.088.100.157.158.159.
160.161.180.181.185.186.191.192.210.211.212.229.230.231.232
Konka
011.017.029.032.034.054.067.069.071.075.076.077.078.079.080.081107113117.173.
174.175.176.189.201.202.203.217.218.220.226.267.236
Skyworth
011.025.033.045.046.060.070.017.072.073.074.079.083.010.107.108.109.162.
163.164.165.166.167
TCL
051.053.068.071.073.082.083.084.085.110.111.170.171.172.178.179.
187.188.197.198.199.200.233
Haier
103.112.118.119.150.151.152.153.154.155.156.182.183.184.193.194.213.228
Hisense
000.006.007.008.010.014.015.025.045.046.103.105.107.115.116.128.129.130.131.
138.139.150.151.152.153.154.155.156.182.183.184.193.194.213.228