ASSIST guidelines shed light on effectiveness of nighttime illumination

Recently revealed research shows that conventional photometry may misestimate the effectiveness of some light sources used at night. The Alliance for Solid-State Illumination Systems and Technologies (ASSIST) has published a new volume in its "ASSIST recommends" series, "Outdoor Lighting: Visual Efficacy."
The volume, developed through previous research by the Lighting Research Center (LRC) at Rensselaer Polytechnic Institute, describes a unified system of photometry that characterizes the often tricky photometric performance of light sources under nighttime applications.
How humans see
The human visual system uses two types of photoreceptors, cones and rods, found in the retina. Cones are used to process visual information under daytime or "photopic" light levels, while rods work under completely dark "scotopic" conditions.
There is, however, a range of light levels called "mesopic," where both cones and rods together provide input to the visual system. Mesopic light levels are typically found outdoors at night, where streetlights, cars, and buildings all contribute to the total Light level.
Since commercial photometry is based entirely upon the photopic or daytime luminous efficiency function, it may misestimate the effectiveness of some light sources used at night, says LRC Director Mark Rea, Ph.D., one of the authors of the "ASSIST recommends" volume .
A unified photometric system
The proposed unified system of photometry integrates both the scotopic and photopic luminous effects functions into a complete system that can be used across the entire range of light levels available to the human visual system. The system differentially weights the two efficiency functions depending upon the light level.
"In effect, it is a system for choosing among commercial available light sources to deliver the same unified, rather than photopic, photometric quantity," says Rea.
Calculating unified luminance
The ASSIST publication provides step-by-step instructions for calculating the unified luminance of a given light source based on light level and the scotopic-to-photopic ratio of the light source.
The different combinations of light sources and light levels may produce the same unified luminance, which indicates photometric equivalency., the system can serve as a simple method for trading off light sources and light levels under mesopic conditions, and such aid in the selection of light Sources for a given application.
How ASSIST works
ASSIST is a collaboration between researchers, manufacturers, and government organizations. Its goal is to identify and reduce major technical hurdles currently facing solid-state lighting.
The "ASSIST recommends" program provides a set of formal recommendations to the LED and lighting communities about issues important for the reliable performance of LED lighting and its comparison to other light source technologies.

Pvc Tape: Backing with soft PVC film as the basic material and being casted with pressure sensitive tape, has the advantage of insulation, flame-retardent, voltage-resistant and freeing-resistant, and be used for auto-mobile wiring, electric wire wrapping and insulating protection.

PVC Tape features: color diversity, durable, high intensity, sticky tape take the gender is good.

PVC tape application: apply to electric wire, cable winding, transformer, power distribution equipment, automobile circuit, electrical engineering, household electrical, motor, capacitor, regulators etc all kinds of motor, electronic parts of the insulation fixed use.

black insulation tapecolorful pvc tapepvc electrical insulating tape

vinyl electrical tape

PVC TAPE Specification:

Thickness: 0.10-0.20 mm       

Adhesive: rubber       

Adhesion: 1.6/1.8 N/cm       

Tensile strength: 16/18/28 N/cm  

Elongation: 160%           

Voltage breakdown: 6.5/6.8/8.0 KV

Adhesive

Thickness

mm

Total thicknessmm

Adhesion

N/cm

Tensile strength

N/cm

Percentage

Elongation

%

Voltage breakdown

KV

Rubber based

0.10

0.115

1.6

16

160

6.5

Rubber based

0.11

0.125

1.6

18

160

6.8

Rubber based

0.13

0.145

1.6

18

160

6.8

Rubber based

0.16

0.175

1.6

28

160

8.0

Rubber based

0.17

0.185

1.6

28

160

8.0

Rubber

Based

0.18

0.195

1.6

28

160

8.0

Rubber based

0.10

0.115

1.6

16

160

6.5

Rubber based

0.11

0.125

1.6

16

160

6.8

Rubber based

0.13

0.145

1.6

16

160

6.8

Rubber based

0.16

0.175

1.8

28

160

8.0

Rubber based

0.16

0.175

1.8

28

160

8.0

rubber

0.18

0.195

1.8

28

160

8.0

rubber

0.18

0.195

1.8

28

160

8.0

USAGE FOR PVC TAPE:

 PVC TAPE USAGE

PACKING FOR PVC TAPE:

pvc electric tape

insulation tape

Apacking

PVC Tape

Pvc Tape,Flame Retardant Tape,Custom Pvc Tape,Pvc Insulation Tape

Shijiazhuang Longgong Plastic Products Co., Ltd. , http://www.pvctapemanufacturer.com