The problem of LED leakage has been encountered by many people. Some are found during production testing, and some are found when customers use it. The timing of leakage is also different. Some are available after the LED package is completed; some are appearing after a period of time in the warehouse; some are after aging for a while; some are after the customer is soldered; some are after the customer has been using it for a while. The specific cause of the leakage problem has been plaguing the engineers of the packaging factory.
LED leakage causes
In the introduction, the reasons for LED leakage caused by some people are listed. According to my years of experience in dealing with LED problems and using LEDs, I believe that at present, the main reason for the most likely LED leakage is as follows:
(1) The chip is contaminated (-most important, high-incidence problem)
(2) Silver glue is too high
(3) Wire welding
(4) Stress
(5) Improper use
(6) The chip itself leaks
(7) Improper process, causing chip cracking
(8) Static electricity
(9) Other reasons
I almost put the problem of static electricity to the end, almost subverting the understanding of the industry and even experts. Why do you put the static problem at the end, and then talk about the detailed reasons later.
Pcb Circuit Boards are widely used in automotive electronics, including power control systems, safety control systems, body electronics systems, and communications.
In the future, automotive electronics will move toward the trend of big functions, namely: mobile communications, multimedia leisure, safe driving assistance (including automatic driving), ride comfort, energy saving (including electric vehicles), protection and preservation, all of which pose challenges to the PCB industry. At the same time, it also provides good development opportunities. For example, autonomous driving will bring large-scale applications of millimeter-wave radar, so the demand for high-frequency PCB boards for radars will be significantly increased, and the value is significantly higher than traditional PCB boards; BMS in electric vehicles is one of the core components. PCB board is one of the basic components of BMS and will benefit from the development of electric vehicles.
Pcb Car,Automotive Pcb Circuit Board,Circuit Board Pcb For Automotive ,Circuit Pcb For Automotive
Chuangying Electronics Co.,Ltd , https://www.cwpcb.com